Meler PS 20 NON STOP+, Instruction Manual

Page: 42 / 100

FOCKE MELER GLUING SOLUTIONS
4-16
MELTER OPERATION
HMI : S02001100 v1.0.106
TC : S02200100 v1.0.084
IO : S02102100 v1.0.106
IO : S02101100 v1.0.106
75 rpm
50 rpm
50 rpm
49 rpm
53 rpm
PUMP 1
Real speed:
External reference 1
External permission 1
Switch 1
Real speed:
External reference 2
External permission 2
Switch 2
PUMP 2
HMI : S02001100 v1.0.106
TC : S02200100 v1.0.084
IO : S02102100 v1.0.106
IO : S02101100 v1.0.106
3,5 V
0 100 50
0
10
5
Volt rpm
1
0,0 0
2
3,0 20
3
4,0 50
4
7,0 60
5
10 100
Pumping
Analog input
Pumping control menu
This menu allows you to configure the operating options for each of the pumps
installed.
• Start or stop pumping: If external permission is deactivated, when you
press the ‘Pump 1/2’ key, pumping is activated or stopped manually.
When the key is green, the pump is in operation. When it is grey, the pump
is off.
• Pumping speed: If the external speed reference is deactivated, when this
is pressed you can set the pump’s speed.
The minimum and maximum values that can be set are established in the
pump’s minimum and maximum speed alarms. See the point ‘Menu 5.
Pumping/Pumping alarms’.
At the bottom, the display shows the actual pumping speed at that
moment.
• External reference: Activates or deactivates the external speed control of
the pump.
If it is activated, it takes you to a screen to set the pumping ramp speed.
See the point ‘Configuring ramp speed’.
• External permission: Activates or deactivates the external pumping
permission.
When the contact is activated, the LED on the right is green. When it is
deactivated, it is red.
• Switch: Activates or deactivates pump start-up from a switch connector
installed on the unit (optional).
When the contact is activated, the LED on the right is green. When it is
deactivated, it is red.