Meler PS 20 NON STOP+ Instruction Manual Download

Page: 35 / 100

MA-5195-ENG

PS20 NON STOP+ DRUM UNLOADER MANUAL

MELTER OPERATION

4-9

HMI

: S02001100 v1.0.106

: S02200100 v1.0.084

: S02102100 v1.0.106

: S02101100 v1.0.106

10 min

85 °C

60 s

Modbus

B: 57600

Node: 10

2.2 Extra Settings

Inside device temperature alarm

Pumping autolock

Screen saver

Sound on alarm

OFF after reset

White: editable text.

Blue: non-editable text.

Interpretación de las pantallas

Save changes

The ‘SAVE CHANGES’ icon, located in the upper right part of the screen,

appears in the data entry and programming screens. If the data shown on the

screen is stored, the icon appears with a blue background. If the data has not

been stored, the icon is shown with a green background.

Note:

In some options, the unit does not automatically store programming

data. Whenever you modify or program any data that you wish to keep press

“SAVE CHANGES”.

Press to save

Parameters saved

HMI

: S02001100 v1.0.106

: S02200100 v1.0.084

: S02102100 v1.0.106

: S02101100 v1.0.106

300

-60 °C

150 °C

152 °C

PID: Standard

Standby

Temperature:

Real

Set Point

T: Tank

General characteristics

In general, there are several icons and pieces of information that are repeated

throughout the screen navigation, so they will be explained at the beginning

and then not in the next screens.

Navigation icons

Right arrow icon (FORWARD), located in the lower right part of the screen.

Appears when there is a possibility of navigation to a next screen. From the

HOME screen it provides access to the MENU.

Left arrow icon (BACK), located in the lower left part of the screen. This icon

appears on all the menu screens, allowing you to return to the previous

screen.

From any screen you can return to the main screen by clicking on the icon

(HOME) located in the bottom centre of the screen.

White: editable parameter.

Grey: non-editable parameter.

Green: activated.

White: deactivated.

Grey: disabled.

Green: press to save.

Blue: parameters saved.

Alphanumeric

keyboard

Numeric keyboard

BACK

HOME

FORWARD

Summary of Contents for PS 20 NON STOP+





































































































Search results

Summary of Contents for PS 20 NON STOP+

Reviews:

Related manuals for PS 20 NON STOP+

Brands by name

Popular brands

Meler PS 20 NON STOP+, Instruction Manual

Search results

Summary of Contents for PS 20 NON STOP+

Reviews:

Related manuals for PS 20 NON STOP+

Brands by name

Popular brands