Meler PS 20 NON STOP+, Instruction Manual

Page: 19 / 100

INSTALLATION
3-1
MA-5195-ESP PS20 NON STOP+ DRUM UNLOADER MANUAL
3. INSTALLATION
Warning: The melters are equipment with current technology and with certain
foreseeable risks. Therefore, only allow qualified personnel withsufficient
training and experience to use, install or repair this equipment.
Introduction
The PS20 NS+ melters are delivered with all the materials necessary for their
installation. However, some components must be provided by the user him-
self, according to the location and connections in each particular installation:
• Anchoring screws for the melter equipment if required
• Power cord and plug for electrical power
• Pneumatic conduct and connection to the compressed air system
• Multicore cable for external electrical control
• Optionally, a gas ventilation system
Installation requirements
Before installing PS20 NS+ melter equipment, we must make sure that
the space assigned to it permits installing, connecting and using the entire
system. Similarly, we must check to see that the electrical and pneumatic
supplies meet the necessary requirements of the melter equipment being
installed.
Free space
Item Description Dimensions
A DOOR OPENED 630 mm
B DISTRIBUTOR DISPLACEMENT 630 mm
C UNIT LENGTH 1175 mm
D UNIT LENGTH MAXIMUM 2435 mm
E UNIT HEIGHT 1500 mm
F UNIT HEIGHT MAXIMUM 1890 mm
G UNIT WIDTH 630 mm