File Name:
MEITRACK MT80i User Guide
Creator:
Cavana Cheung
Project:
MT80i
Creation Date:
Update:
2010-10-10
2012-07-03
Sub Project:
User Guide
Page:
- 9 - of 15
Revision:
V2.2
Confidential:
External Documentation
Copyright © 2012 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
- 9 -
W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example:
0000,B35,480
SMS Get:
353358017784062,B35,OK
For more details regarding SMS commands, please refer to MEITRACK SMS Protocol.
6.5 Configure by Computer
This part mainly shows you how to use the
MEITRACK Parameter Editor.
Please refer to the
MEITRACK Parameter Editor User Guide
for more information regarding configuration and
functions.
Run ‘PL2303_Prolific_DriverInstaller’ to install the driver for the USB data cable.
Note: PL2303_Prolific_DriverInstaller is in the folder ‘USB-232 Driver’ in the CD.
Connect the USB Data Cable between MT80i and PC.
Open Device Manager (Device Manager is under Control Panel\System and Security\System). You can then find
‘Prolific USB-to-Serial Comm Port’ as the following picture shows.
Note: Remember this Com number. It needs to be input into the MEITRACK Parameter Editor. It is COM3 in this
example and it would be COM4 or COM5…
in your computer.
