MeiTrack Mobileye T622 Manual Download Page 24

Page: 24 / 48

MEITRACK T622 GPRS Protocol

Description

Number of deleted GPRS events: hexadecimal. In general, the number is 1.

Number of remaining cache: indicates the number of events in the buffer; hexadecimal.

Applicable Model

T622

Example

GPRS Sending

@@h27,353358017784062,AFF,1*0B\r\n

GPRS Reply

$$h28,353358017784062,AFF,OK*3D\r\n

3.18

Setting a Geo-Fence – B05

GPRS Sending

B05,

Geo-fence number

Latitude

Longitude

Radius

IN Geo-fence alert

OUT Geo-fence

alert

GPRS Reply

B05,OK

Description

Geo-fence number: 1–8. A maximum of eight geo-fences can be set.

Latitude: latitude of the geo-fence center; decimal; accurate to 6 digits after the decimal

point. If there are only 4 digits after the decimal point, add two digits 0. Otherwise, the

command cannot be used successfully.

Longitude: longitude of the geo-fence center; decimal; accurate to 6 digits after the

decimal point. If there are only 4 digits after the decimal point, add two digits 0.

Otherwise, the command cannot be used successfully.

Radius: The value ranges from 1 to 4294967295. The unit is meter.

IN Geo-fence alert = 0: function disabled.

IN Geo-fence alert = 1: function enabled.

Out Geo-fence alert = 0: function disabled.

Out Geo-fence alert = 1: function enabled.

Applicable Model

T622

Example

GPRS Sending

@@H57,353358017784062,B05,1,22.913191,114.079882,1000,0,1*96\r\n

GPRS Reply

$$H28,353358017784062,B05,OK*F7\r\n

When the tracker exits the geo-fence (latitude: 22.913191; longitude: 114.079882; radiu:

1000m), it will send the following GPRS data packet to the server:

$$J132,353358017784062,AAA,21,22.918046,114.089726,080229123812,A,10,22,12,32,

1,21,6667,847,0|0|10133|4110,0000,124|181|183|2714|922,*5A\r\n

3.19

Deleting a Geo-Fence – B06

GPRS Sending

B06,

Geo-fence number

GPRS Reply

B06,OK

Description

Geo-fence number: 1–8. Only one geo-fence can be deleted each time by SMS or GPRS

command.

Applicable Model

T622

Example

GPRS Sending

@@J27,353358017784062,B06,1*C8\r\n

GPRS Reply

$$J28,353358017784062,B06,OK*FA\r\n

Summary of Contents for Mobileye T622

















































Search results

Summary of Contents for Mobileye T622

Reviews:

MeiTrack Mobileye T622, Manual, Page: 24 / 48

Search results

Summary of Contents for Mobileye T622

Reviews: