MeiTrack Mobileye T622 Manual Download Page 20

Page: 20 / 48

MEITRACK T622 GPRS Protocol

3.7

Enabling the Parking Scheduled Tracking Function (GPRS) – A16

GPRS Sending

A16,

Status

GPRS Reply

A16,OK

Description

The function is available for vehicle trackers only. The first positive input port (high

level) of a vehicle tracker must connect to engine detection. Otherwise, the

function is unavailable.

When the activation status is

, the parking scheduled tracking function is enabled;

when the activation status is

, the function is disabled. GPRS data is sent at the

following interval:



Interval of the A12 function when the engine is on



Interval of the A15 function when the engine is off

Applicable Model

T622

Example

GPRS Sending

@@F27,353358017784062,A16,0*C3\r\n

GPRS Reply

$$F28,353358017784062,A16,OK*F6\r\n

3.8

Controlling Output 1 Status by RFID/iButton – A17

GPRS Sending

A17,X

GPRS Reply

A17,OK

Description

X = 1: function enabled. Before using the function, you must ensure: 1. ACC detection is

connected to input 3; 2. A RFID card has been authorized.

X = 0: function disabled (default).

For example: After swiping the authorized RFID card, you must start the engine within 1

minute. If the time exceeds 1 minute, you need to swipe the card again. After the

engine is started, input 3 has been detecting the ACC status. If ACC ON is detected (that

is, input 3 is the high level), output 1 will not generate data. If ACC OFF is detected, after

1 minute, swipe the authorized RFID card to start the engine as required.

For details about how to authorize a RFID, see commands D10–D15.

Applicable Model

T622

Example

GPRS Sending

@@T27,353358017784062,A17,1*D3\r\n

GPRS Reply

$$T28,353358017784062,A17,OK*05\r\n

3.9

Setting GPRS Parameters – A21

GPRS Sending

A21,

Connection mode

IP address

Port

APN

APN user name

APN password

GPRS Reply

A21,OK

Description

Connection mode = 0: function disabled.

Connection mode = 1: function enabled; use TCP/IP reporting mode.

Connection mode = 2: function enabled; use UDP reporting mode.

IP address: IP address or domain name. A maximum of 32 bytes are supported.

Summary of Contents for Mobileye T622

















































Search results

Summary of Contents for Mobileye T622

Reviews:

MeiTrack Mobileye T622, Manual, Page: 20 / 48

Search results

Summary of Contents for Mobileye T622

Reviews: