MEITRACK MD822S MDVR User Guide
Copyright © 2020 Meitrack Group All rights reserved.
- 29 -
5
Configuring the MDVR by Using the LAN Web Page
(If you want to know how to use the function, please see the
Meitrack MDVR Operation and Function Manual
.)
You can use the LAN to configure the MDVR. There are two methods as follows:
1)
Connect the computer and MDVR to the same WiFi hotspot, and then configure the MDVR on the web page.
2)
Connect the MDVR to the Ethernet, ensure that the computer and MDVR are in the same LAN, and then configure the
MDVR on the web page.
You need to obtain the IP address of the LAN connected to the MDVR. (To obtain the IP address, you can connect the MDVR to
Meitrack Manager to check the network status, send a command to query the network status, or contact the LAN administrator.)
After entering the MDVR IP address in the address bar of your web browser, you can configure the MDVR on the web page.
On the web page that is displayed, enter the user name and password (default user name: admin; default password: 0000), and