- 1 -
File: fmh24-pd-1s-A4-rev1.doc
Rev. 1 Date:07/06/2005
FMH24-PD-1S-IR
Owner's Manual - Installation and Operating Instructions
Please read this manual carefully before installation and use.
Index
Installation Instructions 1
Wiring Connections 2
Operating Manual 3
1. Installation Instructions
Is very important to find the right place to install the Flush Mount unit.
Please make sure to follow all the installation instructions in order to get an
accurate reading of the temperature.
General points to follow:
•
The unit MUST be fitted into a standard electrical box (Gewiss Box - GW00001481VR)
•
The unit should not be installed on an outside wall or where there is an air draft.
•
The unit must not be exposed to a direct sunlight.
•
The standard height to install this unit is 1.5 meter from the floor (5 feet).
Installation procedure:
Connect the wires (see #2)
Put the thermostat in the electrical box.
Meitav-tec Ltd (Contel group)
Tel: 972-3-9626462 Fax: 972-3-9626620
www.meitavtec.com - [email protected]
