MeisterCraft 5456210, Translation Of The Original Operating Instructions

Page: 58 / 162

• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent it
from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be
operated in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a specialist.
Only plug the device into the socket
when the machine is switched off.
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles - do not smoke and
avoid naked flames.
• Wear ear-protectors.
• Wear safety goggles.
• Before carrying out any work on the
machine, pull the plug out of the socket.
• Do not leave keys in the machine.
• Observe the general safety notes for
handling electrical tools.
• Switch the device off and pull the
plug out of the socket if the
connection cable is damaged. A
damaged cable must be replaced
by the manufacturer or by their
customer service or a similarly
qualified person.
Type plate
Observe the technical specifications
detailed on the type plate! The
specifications have the following
meanings:
MSS 290 E Model designation
5456210 Article number
Bj. 2011 Year of construction
SN12001 Series number
230 V~/50 Hz Voltage and frequency
290 W Max. power consumption
n
0
: 6000–
11000 min
-1
Revolutions in idle
Voluntary TÜV "geprüfte
Sicherheit" seal of quality
(tested safety)
CE mark (conformity with
European safety standards)
Safety standard mark for
Croatia
Do not dispose of with the
household waste!
Address of the manufacturer
58
5456210-Schwingsch-man_a 15.12.11 07:36 Seite 58