–
Do not use the flow monitor
as the sole monitoring
device to prevent dan-
gerous conditions
–
Do not install the flow mon-
itor as a load bearing part
within a pipeline system
–
The flow monitor with sight
glass must be installed in
such a way as to preclude
damage to the sight glass
by outside force. If neces-
sary, install an appropriate
impact protection device
All claims for damages due to incorrect
usage are excluded.
2.3 Special precautions
The following section lists residual
risks that might arise from the device.
To reduce health risks and prevent
dangerous conditions, observe the
safety instructions listed here as well
as the safety instructions in the other
chapters of these operating instruc-
tions.
DANGER!
Employment of the device in
explosion-hazard zones
requires the observance of
the Operating Instructions for
"DWG Module ATEX"
including all hazard state-
ments and warnings, therein.
These operating instructions
cannot cover all conceivable
dangers because many dan-
gers arise, not from the device
itself, but from the respective
media flowing through it.
Always observe the appropriate
safety data sheets when using
hazardous media!
Safety
Special precautions
03.09.2018
DWG Module BASICS Flow Monitor
14
