7.4 Installing the TCR180PEX-EL
Power supply
All of the operating voltages required for the card are provided by the PCI (Express) bus.
Detection of the card
Every PCI Express board is a plug & play board. After power-up, the computer’s BIOS assigns resources
like I/O ports and interrupt numbers to the board, the user does not need to take care of the assignments. The
programs shipped with the board retrieve the settings from the BIOS.
7.4.1 Installation of slotcards.
For protection of the TCR180PEX-EL, refer to the chapter
1.
Pay attention to the safety instructions at the beginning of this manual!
2.
The TCR180PEX-EL is not hot-pluggable. Please switch off the PC before installation.
3.
Remove the bracket of the PCIx slot with a suitable tool and plug in the TCR180PEX-EL carefully.
4.
Tighten the bracket of the card and close the computer case again
5.
Connect all necessary cable connections.
6.
Switch on the computer and put the inserted module into operation.
24
Date: 6th May 2021
TCR180PEX-EL
