8 Configuration and Status Monitoring
This chapter explains how to set the IMS-TCR180 up for use via the Web Interface.
8.1 IRIG Settings
In the "Clock" menu of the web interface, both the timecode used to synchronize the IMS-TCR180 and the
timecode to be provided via output modules can be set.
Open the
"Clock"
menu, the
"Status & Configuration"
submenu and select the "IRIG Settings" TAB.
Parameters to be configured
Input Code:
Select the input code to which the module should synchronize
UTC Offset:
If the applied timecode is impinged with a constant time offset to UTC, this time offset must be configured here,
so that the clock can convert the received time to UTC.
18
Date: December 17, 2021
IMS-TCR180
