5 System Installation
5.3 Initial Start of Operation
First install the Meinberg Device Manager software supplied on the USB stick. After the setup, start the
program. If you do not want to perform a setup on your computer, you can start the portable version of the
Meinberg Device Manager software directly on the USB stick:
USB Drive/Software/MbgDevMan/mbgdev-
man_portable/mbgdevman.exe
.
By clicking on the Search Devices button, all available microSync systems that have a serial or a network
connection are recognized by the Meinberg Device Manager and will be listed then.
•
Found systems are displayed with a green dot.
•
Modules that are no longer recognized are displayed with a red dot.
•
Modules whose password or password/user name combination is unknown will be marked with a red x.
Use the corresponding checkbox to select the device
with which you want to establish a connection. With a
microSync system you will then be prompted to enter
your connection data. At the initial start please use
"admin"
for user and
"timeserver"
as password.
microSync
Date: 22nd June 2020
35
