5.1 Connecting the System
Make sure that the system to be connected is connected to your PC or the network via either a serial or a
network connection and is on the same physical network.
NETWORK
GNSS
ANTENNA
DC POWER
-DC in +DC in
SERIAL CONSOLE
Figure: Connection scheme microSync
HR
with power supply, network connector, serial connection
and antenna link
Hint:
Please make sure that only microSync
HR
systems receive DC power via the DMC X1 connector. For the
microSync
RX
models the voltage connection (AC/DC or DC) is made directly at the power supply unit.
NETWORK
GNSS
ANTENNA
SERIAL CONSOLE
PWR AD10 - AC/DC POWER
-DC in
+DC in
N/-
L/+
N/-
L/+
N/-
+
N/-
L/+
PWR DC20 - DC POWER
Figure: Connection scheme microSync
RX
with power supply, network connector, serial connection
and antenna link
The following section describes how you can initially put a microSync system into operation with the help
of the Meinberg Device Manager Software. The supplied USB stick contains an installation file for the Mein-
berg Device Manager software. If you do not want to perform an installation on your local PC, you can start
the "portable" version of the Device Manager directly from the USB stick.
32
Date: 22nd June 2020
microSync
