6 Installation
6 Installation
6.1 Technical data GPS165 Chassis
The variants of the module GPS165 are designed for following housing dimensions of DIN-railmount:
Housing:
GPS165DHS:
85 mm x 105 mm x 104 mm
(B x H x T)
GPS165DAHS:
125.5 mm x 105 mm x 104 mm
(B x H x T)
Ambient Temperature:
0...50
◦
C
Storage Temperature:
-20...70
◦
C
Humidity:
85 %
Protecting Rate:
IP20
6.2 Power supply
The variants of the module GPS165 are designed for following power supply options:
GPS165DHS:
20-60 V DC (DC-insulation 1.5 kV DC)
GPS165DAHS:
100-240 V DC
100-240 V AC, 50-60 Hz
The voltage feed of the DC variants is done via terminal blocks in the frontpanel of the clock and should have
low resistance to minimize spurious emission (EMI).
To avoid potential differences between the signal ground of GPS165 and a post-connected unit installed on
different DIN rails, the signal ground of the clock is insulated from the case.
The case must be grounded by using the rear contact.
GPS165XHS
Date: 5th November 2019
25
Summary of Contents for GPS165
