Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax: +49 (5281) 9309-30
https://www.meinbergglobal.com
[email protected]
GNS181PEX: Low Profile GPS / GLONASS / Galileo / BeiDou Clock (PCI
Express)
The board GNS181PEX is designed as a low profile board for computers with PCI Express interface. The
rear slot cover integrates the SMA antenna connector, a BNC connector for modulated time codes, a 9pin
D-SUB male connector and four status LEDs (2mm light pipes). With this standard height bracket you can
use the D-SUB connector for I/O signals like RS-232 - PPS and PPM and you can use this interface for
firmware updates.
The GNS181PEX is delivered including a low profile bracket. You can mount this part instead of the standard
bracket, to run the GNS181PEX in computers with smaller housing (e.g. 1U server).
The integrated GNSS receiver requires an external antenna. It can be configured to use GPS, Galileo,
Beidou and GLONASS. The configuration allows the user to select one of these sources to be used
exclusively or a combination with up to three of these sources:
* GPS
* GLONASS
* BeiDou
* GPS + GLONASS
* GPS + BeiDou
* Galileo
* GPS + Galileo
* G GLONASS
* G BeiDou
rev 2021.1202.1502
gns181pex
Page 1/6
