About this User's Guide
This user's guide describes the Meilhaus Electronic RedLab WebDAQ 316 data acquisi on device, the WebDAQ
web interface, and lists device specifica ons.
Where to find more informa on
Addi onal informa on about the WebDAQ Series of internet enabled data loggers is available on our website at
. You can also contact Meilhaus Electronic with specific ques ons.
WebDAQ web interface: Open the Help window for informa on about using WebDAQ so ware.
Email:
Phone: +49 8141 5271-0 and follow the instruc ons for reaching Tech Support
Hazardous voltages
Take the following precau ons if you connect hazardous voltages to the RedLab WebDAQ 316 spring terminals.
A hazardous voltage is a voltage greater than 42.4 Vpk or 60 VDC to earth ground.
Ensure that hazardous voltage wiring is performed only by qualified personnel adhering to local electrical
standards.
Do not mix hazardous voltage circuits and human-accessible circuits on the same device.
Make sure that devices and circuits connected to the RedLab WebDAQ 316 are properly insulated from
human contact.
When device terminals are hazardous voltage LIVE (>42.4Vpk/60 VDC), you must install the high voltage screw
terminal backshell (ACC-401) to ensure that the terminals are not accessible and that the devices and circuits
connected to the RedLab WebDAQ 316 are properly insulated from human contact.
Hazardous loca ons : The RedLab WebDAQ 316 is not cer fied for use in hazardous loca ons.
RedLab WebDAQ 316 User's Guide
page 2
