Manual ME-582x Series
Revision 0.9
4 Programming
page 23
Meilhaus Electronic
Picture 11: Digital input/output in single operation mode
Please observe the ME-iDS manual and the ME-iDS help file (*.chm) for
the procedure. You can open both these documents through the “ME-iDS
Control Center) or through the Windows Start menu.
Please read chapter 3.5 on page 12 for the wiring of the digital ports.
4.1.2
Frequency Input/Output
ME-5820
ME-5821
✔
✔
Before you can use the "Frequency measurement" or "Pulse generator"
modes, it is necessary, before opening your application, to run the ME-iDC
configuration tool in order to specify the configuration for the correspond-
ing subdevice (see also Table 3 on page 21).
The programming of the frequency measurement and the pulse generator
is always done in the single operation mode. The subtype of the subde-
vices is always ME_SUBTYPE_SINGLE.
Picture 122: Frequency input/output in single operation mode
