
Operating instructions for trolley washing machine model WS 125
9648649
Design and construction subject to change without prior notice!
Page
15
of
38
Working on the electrical equipment
DANGER
Risk of injury due to electric shock
Work or repairs to the electrical equipment of the system must be conducted by a
qualified electrician!
The wiring diagram for the partially completed machine delivered contains all necessary
operational shut-offs known to the manufacturer MEIKO, as well as other known,
necessary shut-offs and electrical connections. The connectors are clearly indicated in
the wiring diagram. Always make sure that these connections are implemented prior to
commissioning the machine, and that they work reliably.
If any unknown sources of danger that are not described by MEIKO arise due to
connecting system parts, you must eliminate them; this may potentially mean that you
must not operate the machine.
7
Delivery, transport, installation and assembly
7.1 Delivery
Check that the delivery is complete immediately after receiving it by comparing it with
MEIKO’s contract confirmation and/or the delivery note.
If necessary, complain about any missing parts immediately to the shipping company and
notify MEIKO.
Check the entire installation for any damage that may have occurred during shipping.
Should you suspect any damage has occurred during shipping, you should inform:
•
the forwarder,
•
and MEIKO
in writing, and also send a photo of the damaged parts to MEIKO.
7.2 Transport and installation
In order to avoid damage to the machine and life-threatening injuries when shipping the
system, the following points must be observed:
•
Transport works must only be performed only by qualified persons observing the
safety instructions.
For safe transport, the machine parts are supported by a special square-timber frame.
The machine must only be transported on the supplied wooden frame. This is specifically
designed to enable safe and secure transport using
two pallet trucks
.
It is possible to negotiate gentle curves if the pallet trucks are not positioned completely
under the wooden bearers
•
Please also read the chapter on “General safety instructions ".
CAUTION!
Summary of Contents for WS 125
Page 38: ......