9018116
47 / 54
10.3 Daily cleaning
Caution
Material damage due to water ingress
Electrical cables and electronic components can be damaged if they come into
contact with water.
• The cleaning and disinfection machine, control cabinets and other electrical
components must never be sprayed with a hose or high pressure cleaner.
• Ensure that no water can enter the machine by accident.
• If installed at ground level,
never
flood the surrounding room.
Note
Do not use a foaming detergent for dish-washing by hand for pre-cleaning or clean-
ing the cleaning and disinfection machine. Foam can cause unit malfunctions and a
poor wash.
The machine is emptied, see chapter “Decommissioning the cleaning and disinfec-
tion machine
1. Open door.
2. Remove tank cover sieve, filter, wash systems top and bottom. All parts to be
cleaned are blue or have a blue handle.
3. All residues sticking to the tank, tank heating element and sieves must be re-
moved with a brush.
4. Remove the wash and rinse arms and rinse thoroughly under running water.
When doing this, pay particular attention to the nozzles!
5. Clean filter under running water.
6. Reinstall all parts in reverse sequence.
Summary of Contents for TopClean M
Page 53: ...9018116 53 54 15 Notes...