Meiko TopClean M, Instructions For Use Manual, Page: 45 / 54

9018116 45 / 54
10.2 Maintenance table
Note
Maintenance work must only be carried out by MEIKO authorised staff!
Maintenance work
Visual check
Che
c
k
e
d
Cle
a
ne
d
Rec
on
di
tio
ne
d
Mainte-
nance re-
quirement
1. Electrical installation
Re-tighten all screw connections (e.g. heating contactors, control fuse), check
plug/terminal connections
Annually
Carry out a visual check on all electrical equipment (e.g. switches, cables,
plugs, etc.)
Annually
Check tank and boiler heating Annually
2. Pumps
Check pumps for leaks and any visible damage Annually
Check pumps for pump rotor noise and function Annually
3. Wash tank, wash and final rinse system
Functional and visual check of washing and rinse arms Annually
Replace sealing rings on wash arms Annually
Check air trap of the tank and clean if necessary Annually
Check tank level control for leaks Annually
Check sieves and filters Annually
Check wash and rinse systems for leaks Annually
Check water level in tank Annually
4. Casing
Check casing, tank and cladding for damage and function Annually
5. Fresh water installation
Check valves, clean dirt trap Annually
Check that the boiler level control/air trap are not leaking Annually
Check boiler, hoses, clamps and plastic parts do not leak Annually
Check boiler drainage system does not leak Annually
6. Waste water installation
Replace flap on ventilation valve Annually
Check operation of drain pump during drainage Annually
Check that pumps, hoses are not leaking Annually