9763258
58 / 64
5. To ensure that the sensor detects the rotation of the washing arm, remove all
dirt particles and ferrous particles which are sticking to the magnet (1).
6. Clean the inner chamber of the tank.
7. Inspect the main pump filter for contamination daily and clean as necessary. To
clean, remove the filter and rinse thoroughly under running water.
8. Reinstall
all
parts.
9.5
Cleaning the stainless steel surfaces
Caution
Material damage due to incorrect cleaning
Cleaning of parts made of stainless steel with unsuitable cleaning agents, care
products and cleaning utensils leads to damage, deposits or discolourations on the
machine.
• Never use aggressive cleaning or scouring agents.
• Never use cleaning agents that contain hydrochloric acid or bleaches based on
chlorine.
• Do not use cleaning utensils previously used to clean non-stainless steel.
Caution
Material damage due to aggressive cleaning products
The use of aggressive cleaning and care products near the machine can cause
damage to the machine due to their fumes.
• Make sure that the cleaning and care products cannot have direct contact with
the machine.
• Do not use aggressive cleaning agents (e.g. aggressive tile cleaner) to clean
the surrounding area.
• Please observe the notes on the product packaging.
• In case of uncertainty, request information from the suppliers of these products.
We recommend that, when required, the stainless steel surfaces are cleaned exclu-
sively using cleaning and care products that are suitable for stainless steel.
• Lightly soiled parts can be cleaned with a soft and possibly damp cloth or
sponge. For moistening we recommend only using demineralised water.
• In order to prevent limescale, we recommend wiping the surfaces thoroughly
dry after cleaning.
Summary of Contents for M-iClean U
Page 63: ...63 64 9763258 13 Notes ...
