Meiko M-iClean U Operating Instructions Manual Download Page 29 | Manualshive

Page: 29 / 64

background image

29 / 64

9763258

Key/symbol

Meaning

Programme: cutlery

Programme: cups

Programme: dishes

Programme: pans

Programme: glasses - gentle

Programme: glasses - normal

Programme: glasses - intensive

Programme: glasses - cold water rinse

Programme: glasses - cold water rinse

8.2

Detergent and rinse aid

MEIKO recommends brand cleaning products from leading manufacturers.

Cleaning and hygiene products from

make an excellent choice.

Chemical product settings

The required detergent and rinse aid are dispensed from storage containers into the
tank or boiler by electronically controlled dosing equipment. Dosing occurs automati-
cally based on the requirements for the washing process.

The correct settings for the quantity of detergent and rinse aid depend on the prod-
uct used. The relevant chemical supplier can install the correct setting.

Recommendations:

– The pH value of the detergent should be greater than 7.
– The pH value of the rinse aid should be between 7 and 2.

Change of products

Change of product means that one rinse aid or detergent is replaced by another. If
these different products are mixed, it can lead to unwanted occurrences, such as
precipitations.

• Before using new products, thoroughly rinse the hoses and dosing units with

warm water.

«
...
27
28
29
30
31
...
»

Summary of Contents for M-iClean U

































































Reviews:

No comments

Related manuals for M-iClean U

Brand: Washtech Pages: 40

Brand: Gaggenau Pages: 48

Brand: Smeg Pages: 41

Sicily Glory G01

Brand: Midea Pages: 65

Brand: Daewoo Pages: 17

Brand: V-ZUG Pages: 116

Brand: Hanseatic Pages: 70

Brand: Amica Pages: 2

FP-90LST060GMTL-N

Brand: Midea Pages: 5

Brand: VALBERG Pages: 92

Brand: CORBERO Pages: 13

FAV6800A Series

Brand: Maytag Pages: 13

Brand: Gaggenau Pages: 28

Brand: Samsung Pages: 22

Brand: Samsung Pages: 28

Brand: Samsung Pages: 88

WF-B105N(V/C/S)

Brand: Samsung Pages: 22

Brand: Samsung Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands