Operating instructions Glass-, utensil- and dishwasher
M-iClean U
Maintenance and cleaning
9763258
65 / 72
Design and construction subject to change without prior notice!
Caution
Material damage due to water ingress
Electrical cables and electronic components can be damaged if they come into
contact with water.
• The dishwashing machine, switch cabinets and other electrical components
must
never
be sprayed with a hose or high pressure cleaner.
• Make sure that no water can enter the machine unintentionally.
• If installed at ground level,
never
flood the surrounding room.
The machine is emptied, see section see chapter “Shutting down the dishwasher”
on page 51.
1. Open machine door.
2. Remove filter and washing systems.
3. Remove all food residues which are stuck to the tank, the tank heater and the
filters using a brush.
4. Remove the washing and rinse arm and rinse thoroughly under running water.
When doing this, pay particular attention to the nozzles!
Do not use a foaming manual dishwashing detergent for pre-cleaning or for cleaning
the machine. Foam causes malfunctions and can result in a poor wash.
5. To ensure that the sensor detects the rotation of the washing arm, remove all
dirt particles and ferrous particles which are sticking to the magnet (1).
6. Clean the inner chamber of the tank.
7. Inspect the main pump filter for contamination daily and clean as necessary. To
clean, remove the filter and rinse thoroughly under running water.
8. Reinstall
all
parts.
