Operating instructions wet waste treatment unit, Model AZP 80, AZ / AP 80
Datei:BA_AZP80_AZ_AP_9633432_EN_2005-10.docx
9633432
29/36
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
14
Staff training
Only trained and instructed personnel are allowed to work on the dishwashing machine.
The skills required by the personnel for the installation’s operation, maintain and repair
must be clearly established. Any personnel undergoing training are only allowed to work
on the dishwashing machine installation under the supervision of an experienced person.
Persons
Trained operating
personnel
Trained
company
tradesman
Trained company
tradesman or
installation engineer
Activity
Installation and assembly
Commissioning
Operation, use
Cleaning
Checking safety devices
Fault finding
Troubleshooting,
mechanical
Troubleshooting,
electrical
Maintenance
Repairs
Such training should be confirmed in writing.
15
Disposal of the installation
When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Here is a list of the materials that most frequently occur when dismantling:
•
Chrome-nickel-steel
•
Aluminium
•
Copper
•
Brass
•
Electrical and electronic parts
•
PP and other synthetic materials
•
Chrome-nickel steel
16
Maintenance
Maintenance work may only be carried out when the dishwashing machine is shut down.
In addition, the dishwashing machine main power switch must be in the OFF position and
locked in this position
Existing safety systems may not be removed!
A functional test on all safety systems of the machine / installation is carried out during
every regular maintenance..
We recommend that you take out a maintenance contract with our manufacturer’s agent in
order to ensure a long service life.
ATTENTION!
