USER MANUAL
Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system
Edition 4 - May 2022
xii
Handling precautions for electrostatic sensitive devices
Certain devices used in electronic equipment can be damaged by electrostatic discharges
resulting from built-up static electricity. Because of this, special precautions must be taken to
minimise or eliminate the possibility of these electrostatic discharges occurring.
•
Before handling electronic circuits, discharge the static electricity from your body by
touching and momentarily holding a grounded metal object (such as a pipe or cabinet).
•
Avoid the build-up of static electricity on your body by not wearing synthetic clothing
material, as these tend to generate and store static electric charges. Cotton or cotton
blend materials are preferred because they do not store static electric charges.
•
Do not handle electronic circuits unless it is absolutely necessary. Only hold
modules/cards by their handles or panels.
•
Do not touch printed circuit boards, their connectors or their components with conductive
devices or with your hands.
•
Put the electronic circuit, printed circuit board or module containing electronic
components into an antistatic protective bag immediately after removing it from a system.
Replacement parts and accessories
For information on replacement parts and accessories:
•
Visit the Meggitt vibro-meter
®
website at www.meggittsensing.com/energy
•
Contact your local Meggitt representative.
Read the following recommendations carefully before handling electronic
circuits, printed circuit boards or modules containing electronic
components.
Use only approved replacement parts and accessories.
Do not connect with incompatible products or accessories.
Only use replacement parts and accessories intended for use with
SpeedSys300 ODS301 overspeed detection systems that have been
approved by Meggitt SA.
Using incompatible replacement parts and accessories could be
dangerous and may damage the equipment or result in injury.
Summary of Contents for vibro-meter SpeedSys300 ODS301
Page 118: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 126: ...THIS PAGE INTENTIONALLY LEFT BLANK...
