Megger Detex 510836 Series Instruction Manual Download Page 1

 

 

 
 

The Measure of Excellence in 
Electrical Testing… 

 
The industry leader since 1895, Megger offers a comprehensive line of 

electrical test and measurement products, from portable instruments for 
use in the field to fully-integrated systems for high voltage systems testing. 

Megger fulfills a range of requirements found in electric utility, large 
industrial, electrical apparatus manufacturing, military and governmental 

applications worldwide. 

PORTABLE FIELD TEST EQUIPMENT 

Megger’s extensive product line includes its well known portable field test 
equipment, including the Megger

®

 family of Insulation Resistance testers, 

which indicate the deterioration of electrical insulation; Ground Resistance 
Testers for installing and maintaining grounding systems; and equipment 

for locating faults in both power and communications cable. 

PRECISION TEST & MEASUREMENT EQUIPMENT 

Megger operates a calibration lab traceable to the NIST to insure the quality 

of its precision products, which includes the DRLO

® 

line of digital low 

resistance ohmmeters. 

HIGH VOLTAGE SYSTEMS TEST EQUIPMENT 

Megger is a leading supplier of equipment and systems for High Voltage 
Systems testing applications, from rigorous QC testing of manufactured 

power cable to demanding R&D requirements in the Aerospace industry. 
This range of products includes fully-integrated systems for detecting 

minute levels of partial discharge to HV power supplies and DC dielectric, 
transformer turn ratio and capacitance/dissipation factor test sets for use in 

the field testing of large power apparatus. 
 

No matter whether it’s a hand-held Megger

®

 Insulation Tester or a 750kV 

Partial Discharge Detection Systems, Megger backs it up with a full range 

of support services: 

Summary of Contents for Detex 510836 Series













































Reviews: