PowerDB User Interface
AVTMDELTA4000-EN Rev 6 April 2018
45
Test Form Controls - General
Once a form is opened, all forms have a set of standard controls which are
available across the top of the form as shown below. This allows common
functions such as saving, deleting, opening results, together with functions as
described below.
i.
New
: Allows a different test form to be selected within the TTR - brings
up selection list from menu in
Item i
above.
ii.
Open:
Results or test setups to be used for viewing past results,
appending or retesting.
iii.
Save:
Prompts user to save results, or rename file, or save in PDF
format.
iv.
Save to PDF:
Allows test report to be saved in a format which is shared
or stored without need to have PowerDB to view results
v.
Import/Export:
Allows saving results as a CSV (Excel) file.
vi.
Select Instrument:
Allows change of test instrument under PowerDB
control as noted in '
Item 1 - Getting Started'
above.
vii.
Simulation Mode:
Allows use of a test form without the actual
instrument connected. Useful for training and demonstration to
personnel.
Summary of Contents for DELTA4000
