Megger ADX15, User Manual

Page: 92 / 179

11. After you have located and selected your asset and the proper test configuration, both elements will be shown in
order on the top line of most ADX screens.
12. The asset remains selected and displayed until another asset is selected to replace it. When a testing session has
been completed and the ADX application closed, the software holds the asset selection in memory and reloads the
asset when the ADX software is re-started.
Fig 77: Example test screen showing selected Asset and test configuration.
Saving Successive Tests in the Same Session
During a test session, you can conduct successive tests then save the results for each test before exiting the screen.
However, you can only view the results of the
first test saved using the ADX Reports features. All test results will be
saved to the test event and the results can be viewed using the PowerDB Dashboard PDF download feature.
For example, in Manual RLC testing, you could press ALL LEADS and when the software completes the test you would
press the SAVE icon to store those results in the session’s test event. If you do not exit the test screen, the session’s
test event is still active. You could then (for any reason) press ALL LEADS again and when the software completes the
retest, you would press the SAVE icon again to store those results in the active test event.
When you want to view the test results, you would only be able to view results in the ADX Reports screen for the first
test saved. Similarly, the View feature in PowerDB Dashboard displays only the first results, but all results saved in the
same session (test event) are included in the test event report when downloaded to a PDF file.
www.megger.com Megger Baker ADX User Guide
82
Selecting an Asset and Test Configuration