MegaPoints Controllers
System2 Panel Controller User Reference
Revision 1
megapointscontrollers.co.uk
Page 22
To revoke Wi-Fi access for all connected boards click the “Revoke WiFi Credentials” (1) button (see
below):
You will observe in the Status Log revocation messages. Each board will restart and show an IP
address of “0.0.0.0” showing that it is not connected to any Wi-Fi network.
The board you are issuing the commands from is not affected by this and will remain connected to
Wi-Fi until specifically revoked. This is covered later in this guide.
Actions
The action area (1 below) contains blue text that behaves just like buttons. This section covers each
in turn.
