MegaPoints Controllers AutoSignal User Guide
Revision 10
megapointscontrollers.co.uk
Page 7
Sensors
Sensors are available separately depending on your installation and options required.
DCC Occupancy sensor
The block occupancy sensor is connected in series with one of the DCC feeder wires. It is used to
trigger the red (danger) signal when a train
enters the monitored block.
DCC Points Position sensor
Points position sensors detect the direction of turnouts and enable automatic switching of the
feather. The points Position sensor can be connected to
your frog polarity switch or closure rails whichever is
more convenient. The Feedback Module user guide has
the following detailed hook-up diagrams for the points
position indicator.
