5
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 240V automatically
3.
This unit must be earthed. (electronically grounded)
The occupation of the connection
-
cable is as follows:
This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz
The fixture is equipped with Neutrik panel mount 3 and 5 pin XLR Sockets for DMX input and output. The sockets are
wired in parallel. Only use a shielded twisted pair cable designed for RS
-
485 and 3 or 5 pin XLR plugs and connectors
in order to connect the controller with the fixture or the fixture with another.
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120 Ohm re-
sistor between the (
-
) and the (+) signal into a 3 pin XLR plug and plug it in to the last fixture on
the signal run. Pre
-
manufactured terminator plugs are available for
purchase from your Mega
-
Lite dealer (P
-
DMX
-
T).
Cable (USA)
Cable (EU)
Pin
110V
Black
Brown
White
DMX
-
512 Connection
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
220V
L
L
L
N
Main Power Connection
DMX—Input
DMX—Output
1. Shield
2. Signal (
-
)
3. Signal (+)
4. N/A
5. N/A
2
3
1
5
3
4
2
1
1
2
3
1
2
3
4
5
Summary of Contents for Nova-Lite UV200
Page 2: ......
