MEFA
SPEDYTOR
INCLUDED
PRINTER COMPONENTS
CONTROL PANEL
SIGNALING PRINTER STATUS
LF
ON
BAT
Pressing the button and holding it down for more than 1 second while the
printer is on turns off the printer. After proper configuration, the printer can also
turn off automatically after a certain period of inactivity.
Paper eject button.
Briefly pressing the button in normal operation mode ejects the paper one line.
Holding the button down causes a continuous stroke, lasting until the button is
released.
Printer status indicator (multicolor LED).
With normal and correct operation of the printer, the indicator lights up steadily
and its color indicates the active interface through which the printer receives
data
- BLUE / GREEN : USB
- BLUE : Bluetooth.
Printer sleep
After proper configuration, the printer can be put to sleep to save energy while
being ready for use. In sleep mode, the status indicator goes off.
The printer wakes up when one of the selected data sources is activated.
SIGNALLING
NAME
DESCRIPTION
WHITE / GREEN PRINT TEST
Printing, print test.
WHITE / BLUE
DATA DUMP
Storing printed data in a file.
WHITE / RED
MASS
MEMORY
Access to configuration files and data dump,
software update.
WHITE /
ORANGE
SETTINGS
Basic settings menu.
The signaling diode flashes alternately white and the color indicating the mode.
To change the mode, press the power button briefly. To confirm the selection,
briefly press the paper feed button. To turn off the printer, press and hold the
power button for longer.
PAPER
CONTAINER
COVER
OPENING
BUTTON
FOR PAPER
CONTAINER
POWER SOCKET
USB INTERFACE
The panel has two buttons and three LEDs.
Power on indicator (left green LED - ON).
The indicator lights when the printer is on.
Printer power button (on / off).
Briefly pressing the button when the printer is turned off turns the
printer on. If the eject button is released during power up, the printer
enters normal operation mode. Turning the printer on with the paper
feed button pressed will activate the special mode.
POWER ON INDICATOR
BATTERY STATUS INDICATOR
(ONLY FOR PRINTER WITH BATTERY)
LF
PRINTER STATUS INDICATOR
CONTROL PANEL
1. Printer
2. Power supply
3. USB cable
4. Roll of 105mm x 40mb label paper
5. Stand for the JUMBO roller
6. User manual and warranty card
THERMAL PRINTER
USER’S MANUAL
