ENGLISH
67
7.
Fit the guide plate (10) on
the left-hand inner blade
guard. Secure the lock nut
M5 but do not tighten the
screw.
8.
Press the support legs (A)
against the blade and
check that the guide plate
moves smoothly.
9.
Assemble the inner flange,
the saw blade and the
outer flange and the nut on
the motor shaft. Hold the
outer flange with one
spanner and tighten with
the other spanner.
NOTE:
The marking for the
direction of rotation of the saw
blade should point in the same
direction as the marking for the
direction of rotation on the guard.
10. Assemble the right-hand
inner blade guard on the
supporting legs (A) with 2
hex screws with a semi-
circular head M6 x 12 and
lock nuts M6.
Right-hand inner
blade guard
Hex screw with
semi-circular head
and lock nut
Summary of Contents for 380-035
Page 75: ......