25
OPERATION
The product is designed for household use only.
NOTE!
Unplug the cord before carrying out maintenance or cleaning.
Inserting and removing a socket
1.
Install a socket on the anvil by aligning the hole of the socket with the anvil. Push down firmly.
2.
Check that it is centred and securely in place.
3.
Remove the socket from the anvil by pulling it out.
Power switch
Start the tool by pressing the power switch (2).
Release the switch to stop the tool.
The switch (2) has two positions:
Top (R) to reverse (anti-clockwise).
Bottom (F) to go forward (clockwise).
Torque adjustment
Press [a] to increase torque (max. 350 Nm).
Press [b] to decrease torque (min. 100 Nm).
Use
1.
Check that the mains voltage corresponds to the rated voltage on the type plate. Plug in the power
cord.
2.
Use suitable protective equipment.
3.
Prepare the workpiece.
4.
Secure the workpiece, if necessary. Do not try to hold the workpiece still with your hands or your
body.
5.
Hold the tool firmly with both hands. Always maintain a firm footing and good balance.
6.
Place the socket on the material. Avoid sudden movements.
7.
Press the switch (2) to (R) or (F) to start operation. Release the switch (2) to stop the tool.
8.
When the work is finished, release the switch (2). NOTE: Do not put the tool down until it has come
to a complete standstill.
Summary of Contents for 009-019
Page 27: ......
