24
Always disconnect the power cord from the mains power before carrying out
maintenance work, cleaning or when the tool is not in use.
Pull the plug out from the mains supply immediately if the power cord or
extension cord gets damaged while you are working.
Do not pull the power cord to disconnect the plug from the mains socket.
When the product is worn out, it must be disposed of in compliance with
regulations in force.
TECHNICAL DATA
Power supply
230 V ~ 50 Hz
Output
1050 W
Safety class
II
Speed (no load)
2200 rpm
Torque
Max. tightening torque (clockwise)
Max. loosening torque (anti-clockwise)
100
–350 Nm
350 Nm
500 Nm
Chuck
1/2’’
Sound pressure level L
pA
102.6 dB(A), K=3 dB(A)
Sound power L
wA
113.6 dB(A), K=3 dB(A)
Vibration
20.9 m/s
2
, K=1.5 m/s
2
Weight (kg)
3.81 kg
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING!
The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1.
Chuc
k 1/2’’
2.
Power switch
3.
Handle
4.
Power cord
5.
Motor housing
6.
Carbon brush compartment
7.
LCD screen
Summary of Contents for 009-019
Page 27: ......
