EN
54
ASSEMBLY
IMPORTANT:
The machine must be switched off and disconnected from the mains supply before any
work on the machine can be performed.
Guard
Fit the guard (3) as shown in the illustration. Adjust the clamping force of the locking arm by
tightening the hex screw out or in when the locking arm is unloaded.
Handle
The extra handle (4) is mounted on the left or right side alternatively on the top of the machine.
Choose the position that provides the most comfortable and safest handling.
Grinding - cut-off disc
1.
Place the inner flange disc (1) over the spindle with the locking edges (A) facing down, and
make sure that the disc and spindle’s edges (8) mate. The flange disc must not rotate freely,
but must follow the rotation of the spindle.
2.
Place the grinding or cut-off disc on the inner flange disc and align the hole against the shoulder.
1
2
A
