Medtrum TouchCare A7+, User Manual

Page: 45 / 145

34
3.3.5 Sensor Graph
The Y-axis of the Sensor graph is featured by four values: 5, 10, 15, 20 mmol/L
(90, 180, 270, 360 mg/dL). The X-axis of the Sensor graph presents a period of
the last 3 hours.
The Sensor graph can be switched to a landscape screen display. Long tap the
Sensor graph for 1 second and the display will turn horizontal. You can see
trend graph of your glucose information for the past 3-hour, 6-hour, 12-hour,
and 24-hour periods.
⚫
Tap the Sensor graph and move the cursor to spot the glucose values. Use
the left and right arrow button to choose the time. The time interval
between two values is 2 minutes.
⚫
The time point when a new Sensor is applied will be marked with a green
square tag “ ”. Readings during warm-up phase will not be displayed but
marked as “warm-up”.
⚫
Glucose value or special status will always be shown in the area below,
between the left and right arrow button. Special status includes:
calibration error (ERR), no readings (???), warm-up phase (Warm-up),
B ureau Veritas