Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Page: 10 / 508

1 System overview
1.1 Introduction
1.1.1 About this manual
This manual describes the operation and intended use of the Protecta XT DR Model
D314DRG system.
1.1.1.1 Manual conventions
Throughout this manual, the word “device” refers to the implanted Protecta XT DR device.
The symbol in parameter tables indicates the Medtronic nominal value for that parameter.
The programmer screen image examples in this manual were produced using a Medtronic
CareLink Model 2090 Programmer. These screen images are provided for reference only
and may not match the final software.
The names of on-screen buttons are shown within brackets: [Button Name].
Programming instructions in this manual are often represented by a programming block,
which describes the path through the application software to specific screens or parameters.
The following conventions are used in programming blocks:
●
The “⇒” symbol precedes the screen text you can select to navigate to a new screen.
●
The “▷” symbol precedes the name of a parameter you can program for a feature.
●
When a navigation step refers to a field on the screen that is labeled with both a row title
and a column title, the “ | ” character is used to divide the separate titles. Parameter
values, however, do not use this convention.
●
When a particular value for a parameter must be selected to make the remaining
parameters or navigation possible, that value appears within <brackets>.
Here is an example of a programming block using these conventions:
Select Params icon
⇒ Screen text to select…
⇒ Screen field Row Title | Column Title…
▷ Parameter Name <Required Value>
▷ Parameter Name
▷ Parameter Name
Medtronic PROTECTA™ XT DR D314DRG
10 Clinician Manual