13
Chapter8 Notes During Operation
8.1 Pay attention to the patient and device status at any moment.
8.2 Patient and device can only be connected through ECG lead cables.
8.3 Keep close observation of the patient and device to make sure they are still during operation.
8.4 Turn off EKG312T after using.
8.5 Disconect the power, and remove the ECG lead cables gently without strong force.
8.6 Properly keep EKG312T and its accessories for operation next time.
8.7 Recording Paper Loading
Recording paper loading sketch map
1)
EKG312T adopts high-speed thermal recording paper with the specification of
80mm(W)×20m(L).
2)
Open the cover of paper cabinet, take out the paper axis and install it into recording paper
then load them at the proper position inside the cabinet as showed in the figure above.
3)
Close the cover of paper carriage. It's recommended to leave 2cm paper outside.
