22
it will look like the illustration on the right above.
8.
When you hear a beep, the meter starts to count
down from 6 seconds. After the countdown, the
test result is displayed with date and time, and
stored in the meter's memory.
9.
If the test result is 13.3 mmol/L or higher, then an
exclamation mark
!
will be displayed on the
screen.
10.
Record the result in your Log Book.
11.
Remove the test strip from the meter. Discard the
used test strip and lancet in a puncture-proof
container.
CAUTION:
When a result either falls in a hypoglycemic range,
<2.8 mmol/L, or in the hyperglycemic range >13.9
mmol/L follow the steps below.
If you get a high or low reading:
1.
Repeat the test.
2.
Test your meter using control solution.
3.
If you still get a high or low reading, contact your
health care professional.
The meter should be wiped with suitable disinfectant by
following the directions in the
section “
How to Clean
and Di
sinfect Your Device”.
Summary of Contents for Blood glucose monitoring system
Page 9: ...7 Meter Back MediSure Blood Glucose Test Strip...
Page 39: ...37 NOTES...
