S
ETTINGS
IN
THE
SETUP
MENU
26
AUDIO SETUP
SPDIF OUTPUT
O F F
:
The digital output (
OPTICAL
and
COAXIAL
boxes) is
switched off.
O N
:
The digital output is switched on.
Dual Mono
These settings are to be used when only the two front loudspeakers are to
be used.
S T E R E O
:
Stereo sound is produced (standard setting).
L - M O N O
:
The link mono signal is transferred to the left and right loud-
speakers (e.g. to select the language for the second channel
sound).
R - M O N O
:
The right mono signal is transferred to the left and right
loudspeakers (e.g. to select the language for the second
channel sound).
M I X - M O N O
:The two channels are mixed together. This is only possible
for DVDs in 2.0 channel mode.
You can change the current selection (except
M I X - M O N O
) using the
CHANNEL
button.
COMPRESSION
The Dolby Digital sound format supports a dynamic setting that you can
use to set the volume difference for quiet and loud passages with a scale
of
O F F
to
F U L L
in nine steps.
O F F
:
The sound is reproduced without changes, i.e. loud pas-
sages and bass sounds are loud and quiet passages are quiet
(cinema sound). This setting is only appropriate if nobody
will be disturbed.
FULL:
The volume difference is minimized, i.e. loud passages are
quieter and quiet passages are louder. This setting is appro-
priate, for example, at night.
`
To change the setting use
to go into the scale on the right hand side
and then use
or
to selected the desired value. You do not
need to confirm the selection with
PLAY
.
PRO LOGIC
If you use sound media in Dolby Pro Logic II format you can make the set-
tings here.
O F F
:
The decoding is switched off; only stereo sound is output.
O N
:
The decoding is switched on; if appropriate loudspeakers
are connected surround sound is produced.
A U T O
:
With this setting the unit will automatically detect a Dolby
Pro Logic medium.
