20
Setting TV and radio reception
`
To switch to receiving digital radio channels press the "
RADIO
” key. The
radio control LED on the front of the device is shown amber and the channel
number is displayed.
`
To switch to receiving TV channels press the "
TV
” key. The radio control LED
is switched off; the screen briefly shows a screen icon and then the channel
number set.
Select channel
Your receiver is already channelled in the factory for some satellites. Page page
26 onwards describes how to add other channels.
`
To switch to the next channel programmed press the "
P+
" key.
`
To switch to the previous programmed channel press the "
P–
" key.
`
In order to directly select a channel enter the corresponding memory space
using the number keys.
`
To switch back to the previously viewed channel press the "
SWAP
” key.
If you want to select a channel via the channel list, you do so as follows:
`
During reception press the
LIST
key. The channel list is displayed.
`
To select a channel select the desired channel using the arrow keys
ST
.
`
To display information on the highlighted channel press the "
INFO
” key.
`
To change to the highlighted channel press the "
OK
” key.
`
To close the channel list and change to the selected channel press the "
EXIT
”
key.
MD 24089a ES EN DE Aldi Final Content.book Seite 20 Mittwoch, 5. August 2009 3:36 15
