164
10.1. Manual setting
In DAB and Bluetooth® mode, you can set the date and time manually using the
button.
When the device is switched on, press the
button. The current date now ap-
pears on the display.
The first item flashes (day) and can only be edited using the
/
buttons or
the
-/+
controller.
Confirm using the
button or by pressing the
-/+
controller. The next item
then flashes (month) and can be edited in the same way.
Once you have set the date, the time appears. Set the hours and minutes in the
same way.
As soon as you have set the last item (minutes) and pressed the
button or
the
-/+
controller, the new settings are stored. The menu is then closed.
The time is now set.
In FM mode, you must use the FM menu to make set-
tings manually, because the button has another func-
tion here. Please read section “12.3.4. FM menu” on
page 167 for more information.
11. Using the alarm
The device has two alarm functions, using either an alarm tone or the radio as a
wake-up call.
11.1. Setting/activating the alarm
If you wish to be woken by the radio, first select a radio frequency (as described
in “12. Radio” on page 166).
Press the
ALARM
button once, to make settings for alarm 1 (
ALARM 1 SET-
UP
). Press the button twice to set alarm 2 (
ALARM 2 SETUP
).
Then press the
button or the.
-/+
controller to proceed and specify the
alarm time (
ALARM 1/2 WIZARD
).
The hour flashes. Select the desired hour using the
/
buttons or the
-/+
controller. Confirm using the
button or by pressing the
-/+
controller. The
next item then flashes (minute) and can be edited in the same way.
Set the duration of the alarm in the same way (
15, 30, 45, 60
or
90
min-
utes).
Finally, set the type of alarm signal (
BUZZER
,
FM
(radio) or
DAB
(radio)).
Now specify which days the alarm is to be activated (
DAILY, WEEKDAYS,
WEEKENDS, ONCE
). In the
DAILY
setting, you must still then specify the
date.
Next, specify the volume of the signal.
Then activate the alarm by choosing the
ALARM ON
setting.
