background image

1

784_QSG_Ve

Part No. 200-2352 - v1

Quick Start Guide - 784 DVB-S/S2 LAN-Caster

The MediaStar Evolution 784 LAN-Caster allows 
DVB-S/S2 TV and Radio channels to be streamed 
onto an IP network. Connect a DVB-S/S2 Satellite 
dish LNB to the LAN-Caster and use the simple 
browser based control interface to stream up 
to 15 channels from a single RF multiplex onto 
the network. A networked MediaStar Digital 
Media Decoder display unit can then decode 
these streams and output the video and audio to 
an LCD or OLED display. The MediaStar ‘Viewer’ 
software application can decode the streams  
and provide live TV pictures and sound on a PC.

What’s in the box

 

784 DVB-S/S2 blade

 

CAT5 patch cable

Physical

 

129 x 41 x 230 mm, occupies 1 (of 9) 770 rack slot. 405g

Ambient operating temperature range

 

0º - 40º C, 770 rack ambient

Power supply

 

7 W (from 770 rack, excluding LNB load)

LAN

 

RJ45 802.3 10/100 Base-T Auto MDIX   
Static or DHCP IP Address   
DSCP stream tagging for QoS

Network protocols

 

UDP, TCP, ARP, DHCP, ICMP, IGMP V2, HTTP, Telnet, SNMP,  
Syslog, SAP/SDP, SMTP, DSCP

RF Input

 

F type female connector (75 Ohms)

RF frequency range

 

950 to 2150 MHz

RF input level

 

-65 to -25 dBm

RF loop-through

 

F type female connector (75 Ohms) 
0 dB (+/-5 dB) gain 
RF signals on currently selected H/V, High/Low band

LNB Voltage

 

13/18 V, 22 KHz signalling 
Max current drain 400 mA (short circuit protected) 
Maximum 770 Rack LNB current 2350 mA

DiSEqc

 

1.0, 1.1

DVB-S Demodulation

 

Modulation: QPSK 
Coding Rate: 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 
FEC: Reed Solomon/Viterbi error correction

DVB-S2 Demodulation

 

Modulation: QPSK, 8PSK 
Coding Rate: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 
FEC: LDCP, BCH

Output Streams

 

15 Multicast or Unicast streams from a single RF DVB multiplex 
Maximum 85 Mbps  
Individual TV/radio channels or Entire multiplex   
Elementary stream data type filtering

Upgradability

 

Enablement code to upgrade from non CAM to CAM support  
(in situ, with no hardware change required)

CAM Support

 

CI CAM modules supported with all common decryption standards   
(Irdeto, Viaccess, Conax, Nagravision etc.)  
Single and professional multi-channel CAMs supported 
PCMCIA connector 5V, 3V CAMs supported

USB Comms

 

USB 1.1 Serial Comms device for external configuration/control

Administration Interface

 

Web pages served from LAN-Caster

Infa-Red Blasters

 

2 off outputs supporting Sky, Sky+, SkyHD IR formats with web page 

RS232 Port

 

Rx, Tx, CTS, RTS up to 115200 Baud Configured for SIPI external  

 

configuration/control OR 
IP to RS232 bi-directional pass through for external device control

Temperature Monitoring

 

PCB operating temperature available remotely via web interface

External IP control interface

 

SCII Command/configuration via IP interface, USB comms and RS232 
comms interfaces

Announcements

 

SAP (Session Announcement Protocol) notification of IP streams

Event Monitoring

 

SNMP or Syslog traps sent to third party SNMP manager  
(MIB available on request).

Email Event Logs

 

 

Automatic email of Event log files via external SMTP server

Software

 

Fully upgradable with ONLY protected Cabletime software from  
an HTTP server

Approvals

 

FCC, CE, CB, TUV Approved

Product Specification

Summary of Contents for Evolution 784









Reviews: