Medias Mediatrix 1204, Reference Manual

Page: 92 / 390

Chapter 4 - Web Interface – SIP Parameters SIP Servers Configuration
66 Mediatrix 1204
SIP Configuration
The Mediatrix 1204 must know the IP address and port number of the SIP servers. You can assign these
information to the Mediatrix 1204 through a DHCP server or manually enter them yourself.
You can also set these parameters via SNMP, as described in “Chapter 9 - SIP Servers” on page 137 and
“Chapter 18 - SIP Protocol Features” on page 219 .
X
To set the SIP servers configuration:
1. In the web interface, click the SIP link, then the Configuration sub-link.
Figure 28: SIP – Configuration Web Page
2. Select the configuration source of the SIP servers information in the SIP Server Source choices.
3. Set the user agent port number in the SIP Port field.
If this field is set to 0, the default SIP port is used.
Table 43: SIP Servers Configuration Sources
Source Description
Static You manually enter the value and it remains the same every time the Mediatrix 1204
restarts. Use the static configuration if you are not using a DHCP server or if you want
to bypass it.
DHCP The value is obtained at start-time by querying a DHCP server and using standard
DHCP fields or options. Using the DHCP configuration assumes that you have properly
set your DHCP server with the relevant information. See
“Chapter 8 - IP Address and
Network Configuration” on page 117 for more details.
2
3
4
4
4