Medias Mediatrix 1204, Reference Manual

Page: 290 / 390

Chapter 24 - Management Server Configuration Using the Management Server
264 Mediatrix 1204
3. Set how you want to define the Management Server information in the DHCP server:
See “Vendor and Site Specific DHCP Options” on page 130 for more details.
Static Configuration
Use the static configuration if you are not using a DHCP server or if you want to bypass it.
X
To use static information:
1. In the ipAddressConfig folder, locate the msSelectConfig Source variable.
This variable defines whether the Mediatrix 1204 shall get its Management Server configuration
through a DHCP server or not.
2. Set the msSelectConfigSource variable to static .
3. Set the following variables:
Table 172: Management Server DHCP Information
To use a... Set...
vendor specific code The msDhcpSiteSpecificCode variable to 0 . Set the management
server IP address in the DHCP server inside the vendor specific sub-
option 200 (hexadecimal 0xC8).
site specific code The msDhcpSiteSpecificCode variable to any value between 128 and
254. Set the management server IP address in the DHCP server
inside the site specific option you have chosen (it must match the
value of the
msDhcpSiteSpecificCode variable in the unit's
configuration).
Table 173: Management Server Static Address
Variable Description
msStaticHost Static management server IP address or domain name.
Default Value : 192.168.0.10
msStaticTrapPort Static management server IP port number. Restart the unit
to update this parameter.
Default Value : 162
Note : Change the port used in the management server. Not
doing so will prevent you from viewing the received traps
from the unit.
The management server could be a product such as the
Unit Manager Network.