Medias Mediatrix 1204, Reference Manual

Page: 29 / 390

Mediatrix 1204 3
C
H A P T E R
1
Installation
This chapter describes the installation and initial provisioning of the Mediatrix 1204.
Requirements
The Mediatrix 1204 requires the following items to work properly:
Safety Recommendations
To ensure general safety, follow these guidelines:
Do not open or disassemble the Mediatrix 1204.
Do not get the Mediatrix 1204 wet or pour liquids into it.
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
Package Contents
The Mediatrix 1204 package contains the following items:
the Mediatrix 1204 unit
four rubber feet
a power cord for the country in which you are using the Mediatrix 1204
a printed Quick Start booklet
a printed Flyer
You also need a 10/100 BaseT Ethernet RJ-45 cable.
Table 3: Required Items
Item Description
DHCP Server (optional) Supplies network parameters to the Mediatrix 1204.
DNS Server (optional) Translates domain names into IP addresses.
SIP Server Manages the active calls of the Mediatrix 1204.
Management Server
(optional) Module or software used to remotely manage and configure the Mediatrix 1204.
Such software could be the Mediatrix Unit Manager Network. See
“Unit
Manager Network – Element Management System” on page xxiv for more
details.
TFTP Server or HTTP
Server Necessary for software updates.
Syslog Daemon
(optional) Receives all status messages coming from the Mediatrix 1204.