Medias Mediatrix 1204, Reference Manual

Page: 169 / 390

Presence Compositor Server Reference Manual (SIP Version)
Mediatrix 1204 143
Static Configuration
Use the static configuration if you are not using a DHCP server or if you want to bypass it.
X
To use static information:
1. In the ipAddressConfig folder, locate the sipServerSelectConfigSource variable (under the
ipAddressConfigSipServer group).
This variable defines whether or not the Mediatrix 1204 must get its Presence Compositor server
configuration through a DHCP server.
2. Set the sipServerSelectConfigSource variable to static .
3. Set the following variables:
Table 90: Presence Compositor Server Static Information
Variable Description
sipPresenceCompositorStatic
Host Presence Compositor server static IP address or domain
name.
Default Value : 0.0.0.0
sipPresenceCompositorStatic
Port Presence Compositor server static IP port number.
Note : If this variable corresponds to a domain name that is
bound to a SRV record, the port must be set to 0 for the unit
to perform DNS requests of type SRV (as per RFC 3263).
Otherwise, the unit will not use DNS SRV requests, but will
rather use only requests of type A because it does not need
to be specified which port to use.
Default Value : 0