Medias Mediatrix 1204, Reference Manual

Page: 159 / 390

Vendor and Site Specific DHCP Options Reference Manual (SIP Version)
Mediatrix 1204 133
Example
The following example shows how to enter the Syslog (code 110) IP address 192.168.0.10 (with the default
port used) and the same address at port 2545 in hexadecimal format.
Figure 59: Example – Short Address String
Figure 60: Example – Long Address String
Settings Example
Let’s say for instance you want:
the Image server at 10.3.2.154 (static)
the Management Server via DHCP in the vendor specific options
the Syslog server via DHCP in the site specific option #250
The following are the corresponding MIB values:
imageSelectConfigSource = static
imageStaticPrimaryHost = 10.3.2.154
msSelectConfigSource = dhcp
msDhcpSiteSpecificCode = 0
syslogSelectConfigSource = dhcp
syslogDhcpSiteSpecificCode = 250
The following is the corresponding DHCP setup, assuming the Management server is located at 10.3.2.201
and the Syslog server is located at 10.3.2.200 (port 1024):
Option 43 (vendor specific option) contains the hexadecimal sequence
0xC80x40xA0x30x20xC9
inserted among other sequences .
0x6E 0x4 0xC0 0xA8 0x0 0xA
Vendor or
Size IP Address
Site Specific
Code
0x6E 0x6 0xC0 0xA8 0x0 0xA 0x9 0xF1
Vendor or
Size IP Address
Port
Site Specific
Code
Table 81: Hexadecimal Sequence - Option 43
Hexadecimal Part Corresponding Information
0xC8 code 200 (management server)
0x4 size of 4 bytes
0xA0x30x20xC9 IP address 10.3.2.201